Modification Menu
Last updated
Last updated
Dentbird Crown provides four types of modification.
You can use four different modification modes: Inner, Transform, Outer, and Adapt.
Modify the inner shape of the crown by setting the manufacturing method, inner surface parameters, and insertion path.
You can switch between Guide or List modes for the parameter input method.
Quick Guide
Guide : Modify the parameters using an intuitive guide image.
List : Modify the parameters in the list format.
2. Manufacturing method
Select a crown manufacturing method (3D Print, Milling with PMMA, Milling with Zirconia).
3. Parameters
Modify the parameter values required for designing the inner shape of the crown, such as cement gap and minimum thickness.
In Guide mode, clicking the label will open the input field for each parameter.
4. Reset to default
Reset all parameter values entered by the user to default values.
5. Block out
Turns on/off the block out option to automatically handle undercut areas.
6. Apply
Changes the inner surface of the crown according to the values set by the user.
Caution
The newly set values are not applied until the [Apply] button is clicked.
7. Insertion direction
The insertion direction of the crown can be modified.
You can either move the arrow from the existing setting value or set the insertion direction to the current point of view.
Modify the overall shape of the crown by rotating and scaling.
Modify the appearance of the crown, and add or delete hooks.
1. Deform tools
You can modify the outer surface of the crown with a brush.
1.1 Deformation method
You can choose the method for modifying the crown's outer surface (Free deform, Add, Remove, Smooth, Flatten). Outer surface modification is typically performed by clicking and dragging with the left mouse button pressed.
1.2 Brush setting
You can set the range and intensity of the brush. By default, you can adjust them using sliders, and you can change the range by using Shift key + wheel up/down and the intensity by using Ctrl key + wheel up/down.
2.Smart edit
You can edit the groove or cusp by using sliders.
3. Hook
Hooks can be added at desired locations, and multiple hooks can be added.
Caution
Crowns with added hooks cannot be modified on the outer surface. Add hooks after completing the crown design modification.
1. Distance setting
Set the amount of contact with antagonist and adjacent teeth.
2. Block out
Turn on/off the block out option to automatically handle undercut areas.
3. Whole adaptation
Adaptation is performed considering both antagonist and antagonist teeth.
4. Occlusal adaptation
Adaptation is performed on the antagonist.
5. Approximal adaptation
Adaptation is performed on the adjacent teeth.
You can hide both the modification tab and the tools.
Click the <Done> button in the bottom left to apply the modifications and finish the modification process.
Last updated : 2023.10.30 Back to top
Modifies the degree of contact with antagonist and adjacent teeth based on the set values.
