# Implant Library

## How to select implant library

## Instructions

### Step 1

When entering the implant design mode, the Select Library tool panel will appear in the upper left corner.

<figure><img src="https://2117413975-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdD2ahyV4fKfKIjgxaMxi%2Fuploads%2FW8uMTV3AMwWBBWb3UnHe%2Fimage.png?alt=media&#x26;token=bf0cf650-ac76-4a8b-b5bb-c859d69a2d80" alt=""><figcaption></figcaption></figure>

### Step 2

In the tool panel, select the appropriate options for your case in sequence.

<figure><img src="https://2117413975-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdD2ahyV4fKfKIjgxaMxi%2Fuploads%2FqyVDllWWbpkkDkJWZneU%2Fimage.png?alt=media&#x26;token=795b13d4-76a5-46f1-928d-134e762724ab" alt="" width="279"><figcaption></figcaption></figure>

### Step 3

Choose the implant brand and abutment type from the library.

<figure><img src="https://2117413975-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdD2ahyV4fKfKIjgxaMxi%2Fuploads%2FXzradkvwZC0gHFhhPRYo%2Fimage.png?alt=media&#x26;token=3dba132b-7d9c-4dba-a92c-0eb0265f5cee" alt=""><figcaption></figcaption></figure>

### Step 4

Select the scan body type and abutment size.

<figure><img src="https://2117413975-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdD2ahyV4fKfKIjgxaMxi%2Fuploads%2FTwcP5Tw6UM6q54x0k2Vh%2Fimage.png?alt=media&#x26;token=3db34ab9-39e4-403a-873e-2092f523a16e" alt=""><figcaption></figcaption></figure>

### Step 5

Click on the designated area of the scan data shown in the left guide image to align the library. Then, click the Apply button.

<figure><img src="https://2117413975-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdD2ahyV4fKfKIjgxaMxi%2Fuploads%2FpDDDYamXGHqqVWGo4cma%2Fimage.png?alt=media&#x26;token=cf744f16-a6ee-4908-95d5-488a377d1ca4" alt=""><figcaption></figcaption></figure>

{% hint style="info" %} <mark style="color:blue;">**Quick Guide**</mark>

You can check the currently selected implant library and type at the bottom of the screen.
{% endhint %}

### Step 6

After verifying the aligned abutment, click the Apply button. If you wish to add a screw hole, check the corresponding checkbox.

<figure><img src="https://2117413975-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FdD2ahyV4fKfKIjgxaMxi%2Fuploads%2FSd4vBNkKQU1BvvzaHBlI%2Fimage.png?alt=media&#x26;token=408f2d53-7c23-4e89-88b8-4cb47fe778cf" alt=""><figcaption></figcaption></figure>

{% hint style="info" %} <mark style="color:blue;">**Quick Guide**</mark>

Screw holes can also be added or removed after the crown has been created.
{% endhint %}