# Preference

To change design settings in Dentbird Modeler, go to **Top Bar > Settings > Preference**.

<figure><img src="https://2758425664-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBXhED0PsKceKKZNDt4o6%2Fuploads%2FXGKrTZhyPFodEXSXm1en%2F%EC%8A%A4%ED%81%AC%EB%A6%B0%EC%83%B7%202025-04-01%20153135.png?alt=media&#x26;token=eaad654f-021f-4a35-99a9-4846892cc3f1" alt=""><figcaption></figcaption></figure>

### 1. Color

<figure><img src="https://2758425664-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBXhED0PsKceKKZNDt4o6%2Fuploads%2F2kCn97KgMvPqDaiVUITj%2F%EC%8A%A4%ED%81%AC%EB%A6%B0%EC%83%B7%202025-04-01%20152547.png?alt=media&#x26;token=8bf0c2b7-8e8f-4aee-8a0f-3133040d7736" alt=""><figcaption></figcaption></figure>

#### 1.1 Mesh color&#x20;

Specify the rendering color for each data type in Dentbird Modeler.\
These colors are displayed when the data does not have a texture or when textures are turned off.

### 2. Accessibility&#x20;

<figure><img src="https://2758425664-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBXhED0PsKceKKZNDt4o6%2Fuploads%2FmVZS1Ekipdg5ixokGW7q%2F%EC%8A%A4%ED%81%AC%EB%A6%B0%EC%83%B7%202025-04-01%20152606.png?alt=media&#x26;token=b3438f08-4d0c-43b5-ad8e-49fa8c0fe98b" alt=""><figcaption></figcaption></figure>

#### 2.1 Mesh optimization

Automatically optimizes the uploaded scan data by using AI to inspect and process it.

#### 2.2 Auto save

Automatically saves changes at regular intervals during the design process.

### 3. Tool

Set the default tool panel configuration in the side toolbar.\
When using Dentbird Modeler, the selected tools will automatically open based on your preferences.\
Tools can still be opened or closed at any time during the workflow.

<figure><img src="https://2758425664-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBXhED0PsKceKKZNDt4o6%2Fuploads%2FthXSsbbvFyVwwkYC43TO%2F%EC%8A%A4%ED%81%AC%EB%A6%B0%EC%83%B7%202025-04-01%20152617.png?alt=media&#x26;token=eb8b5eca-6149-4b7d-afa7-a1fdd46cfaa3" alt=""><figcaption></figcaption></figure>

### 4. Base

<figure><img src="https://2758425664-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBXhED0PsKceKKZNDt4o6%2Fuploads%2Fu03utzvYCQdUStegkRto%2F%EC%8A%A4%ED%81%AC%EB%A6%B0%EC%83%B7%202025-04-01%20152624.png?alt=media&#x26;token=585b9c22-6664-4d14-b2f4-bd2567b01d1e" alt=""><figcaption></figcaption></figure>

**4.1 Base type**

Set the default base type when using Dentbird Modeler.

**4.2 Fill type**

Set the default internal fill method for the base.

**4.3 Wall thickness**

Set the default thickness of the base.

**4.4 Drain hole**

Always enable drain holes and set the number of holes by default.

{% hint style="info" %} <mark style="color:blue;">**Quick Guide**</mark>

A maximum of 10 drain holes can be added per side.
{% endhint %}

**4.5 Reset parameter**

Reset any custom changes made to the base settings.

### 5. Die

<figure><img src="https://2758425664-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FBXhED0PsKceKKZNDt4o6%2Fuploads%2FgcTuoQKTkN4nJldndJM5%2F%EC%8A%A4%ED%81%AC%EB%A6%B0%EC%83%B7%202025-04-01%20152632.png?alt=media&#x26;token=5832292f-e942-423d-a071-770165e2c77d" alt=""><figcaption></figcaption></figure>

**5.1 Ditch on die**

Always enable ditching on dies when using Dentbird Modeler.

{% hint style="info" %} <mark style="color:blue;">**Quick Guide**</mark>

The Model Ditch Width and Die Gap settings are enabled when Ditch on Die is checked.

* Model Ditch Width: Sets the width of the ditch within the model.
* Die Gap: Sets the gap between the die and the model.
  {% endhint %}

**5.2 Reset parameter**

Reset any custom changes made to the die settings.

**5.3 Die numbering**

Automatically label each die with the corresponding tooth number by default when using Dentbird Modeler.
