Library Tool

Select library

By selecting the components of the library in order, the corresponding library will be loaded and aligned with the scan data.

1. Company

Select the implant manufacturer from the list.

2. Implant

Choose the implant type.

• BEGO

• BIOHORIZONS

• CREODENT

• DENTIS

• DENTIUM

• DIO

• GEOMEDI

• HASSBIO

• IPD

• IZENIMPLANT

• LYRAETK

• MEDPRO

• NEOBIOTECH

• OSSTEM

• TRIDENTAL

• TRUABUTMENT

• WITH

3. Type

Select the scan body type.

4. Subtype

Choose the abutment size.

5. Screw hole

Enable this option to create a screw hole in the crown.

6. Apply

Apply the selected options to begin the crown design

Library Alignment

1. Back

Return to the library selection page.

2. Library alignment mode

The alignment tool offers 1-Point Mode and 3-Point Mode.

Quick Guide

• 1-Point Alignment: Default mode. Click the same position on the scan data as shown in the guide image to align the library.

• 3-Point Alignment: Select three points each on the library and the scan data within the 3D viewer to complete the alignment.

3. Inspection

Check the numerical color map values that indicate the accuracy of the alignment between the scan data and the library.

4. Reset

Resets the current alignment. This option is only available in 3-Point Alignment mode.

5. Apply

Confirm the aligned position and apply the settings.

Quick Guide

You can check the selected library and type at the bottom of the screen.

Caution

Margin line modification is not allowed after the library has been aligned.