Modification

Modification (General)

The toolbar, which provides access to the modification menu at the bottom center of the screen, can be displayed through one of the following three methods:

1

Click outside the designated abutment area within the scan data.

2

Select the tooth number label of the abutment you wish to modify.

3

Select the tooth number to be modified from the tooth indicator.

The displayed toolbar varies depending on the prosthesis type. Selecting an icon on the toolbar opens the corresponding tool panel. For detailed usage of each toolbar, refer to Main Toolbar.

If the tool panel includes an Apply button, clicking it will apply the modification to the design. If there is no Apply button, the modification is applied when the tool panel is closed.

Modifying Scan Data

Modification Before Prosthesis Generation

Before generating the prosthesis, clicking on the abutment allows modifications to:

When the user clicks on an area outside the designated abutment region in the scan data, modifications such as occlusal alignment ( 🔗Occlusal Alignment), mesh editing ( 🔗Mesh Editing), and virtual extraction ( 🔗Virtual Extraction) can be made.

Modification Before Prosthesis Generation

Before generating the prosthesis, clicking on the abutment allows modifications to:

• Tooth number and prosthesis type (🔗Tooth Number Selector)
• Margin line (🔗Margin Line)
• Insertion direction (🔗Insertion Direction)
• Inner surface (🔗Inner Surface)

Modification After Prosthesis Generation

After the prosthesis has been generated, clicking on the abutment allows modifications to:

• Tooth number and prosthesis type ( 🔗Tooth Number Selector)
• Margin line (🔗Margin Line)
• Insertion direction (🔗Insertion Direction)
• Inner surface (🔗Inner Surface)
• Deformation (🔗Transform)
• Outer shape (🔗Outer)
• Fit (🔗Adaptation)

For bridge cases, modifications to the connector (🔗Connector) are also possible.

Back to top